A premium grade metal cross linked sealer finish suitable for all resilient flooring.
Easy to use
Can be applied using conventional mops
High solids content
1-2 coats will give excellent gloss on the floor
Can be maintained by normal polishing machines
An aqueous acrylic emulsion with polyethylene waxes for ease of buffing
Coverage is approximately 50m2/L
Suitable for all resilient flooring
Dominant’s Earthcare range of products meet our strict environmental and sustainability standards to reduce our environmental impact.
Suitable for vinyl and linoleum floors.
BEFORE GETTING STARTED
Before coating the floor with Image ensure the floor is clean and dry. New floors should be washed with a heavy duty detergent first to remove any coatings or materials from the manufacturing process.
The mops used must be clean. If using a new mop rinse thoroughly in a detergent solution then water to remove any loose fibres from the mop, or treatments from sponge mops.
- Pour Image into a clean bucket and apply using a mop, wringing out gently so it is not dripping. Use even movements to spread over the floor, adding more Image to the mop when it begins to drag.
- Allow to dry which will take 30 minutes or more, then apply a second coat at right angles to the first one. A third coat may be applied if required.
- Allow the floor to dry for at least 1 hour before opening area to foot traffic.
Image must be applied using a number of thin coats. Do not try to apply using one thick coat as the surface may seal before the underside of the film has cured.
CARING FOR YOUR FLOORS
The floor may be cleaned using neutral or moderately alkaline cleaners, or by a wash and wax product such as Ammopol. Do not use any products containing ammonia on the floor as the ammonia will remove the Image film. The floor may be buffed to remove scuffs and scratches, but is should be left to fully cure for at least 24 hours before using any polishing machine. Use a white or red pad for buffing. When the floor becomes badly marked the Image may be stripped off using Cross Link Strip.
Fragrance: Mild acrylic odour
Colour: Milky white
pH level: 9.0